KRL-2X300/1000 High Speed Mixing Machine

KRL-2X300/1000 high-speed mixing machine is mainly used for such processes as the formulating, mixing dying of corn and farina, and the drying, sealing odd of engineering plastics like ABS Merlon prior molding and processing, it is also applicable for the mixing of Arcolite. This assembly integrates heat mixing process and cold mixing process together, the powder materials after heat mixing will automatically enter could mixing to be cooled,it exhaust remaining gas and prevents caking. It is an efficient and ideal equipment for the formulating, mixing and drying of farina degrading materials. Specification: A, Cold mixing: 1,Total volume: 1000L 2,Rotating speed of primary axis: 100 r/min 3,Cooling time: 10-15 minutes 4,Temperature of cooling materials: 40-60°C 5,Cooling mode: water cooling 6,Cooling media: tap water 7.Pressure of cooling media: 0.1Mpa 8,Temperature of cooling water: 0-15°C 9,Electric motor: Y180L-6 15KW 10,Standing electric-control box: 1PC 11,Working gas supply: compressed air 0.65-0.8Mpa 12,Working power supply: AC 380V 50Hz, 3 phase, 4 wire 13,Contour size electric-control box: 2050mmx250mmx2850mm B, Heat mixing: 1,Total volume: 300L X 2 2,Effective volume: 225L 3,Total stirring rods: 3 for each set 4,Rotating speed of stirring rod: 970 r/min 5,Heating mode:electric heating 12W, special mechanic oil with burning point above 700°C 6,Mixing time: 5-35 min/pot 7,Electric motor: AC motor 55kw Frequency Conversion Control 8,Rotating speed: 980r/min (individually) 9,Voltage: 380V 50Hz 3 phase 4